How to repair nylon conveyor belt

Release time:

2023-03-23

Nylon conveyor belts are easier to repair than steel or full-core belts.
If the nylon conveyor has holes, the builder usually fills the holes with a rubber repair agent and then applies a patch strip above and below for field cold curing.
Specific repair methods are as follows
The upper and lower parts of the holes are polished with a tungsten steel disc high power Angle grinder, and then cleaned with cleaning agent;
Apply the cold vulcanized adhesive SK313 to the lower part of the belt, and the bonding surface of the RIT repair strip (for repair strips, it is recommended to use fabric reinforced repair strips to repair damaged fabric parts), then attach the repair strip to the lower layer;
Fill the hole with the rubber repair, flatten it with a scraper, and then apply cold vulcanized glue to the top of the belt. The procedure is the same as above. After the repair strip is affixed, press it tightly with a press roller.

Keywords:

Nylon conveyor belt

None

Characteristics of wire rope traction belt conveyor

None

Characteristics of wire rope traction belt conveyor

Recommended

How to repair nylon conveyor belt

2023-03-23

Characteristics of wire rope traction belt conveyor

2023-03-23

Common conveyor belt which is more durable